Table of Contents
Advertisement
Trunk Member
1.
You can also use the VLAN Static Membership by Port page to configure VLAN groups based on
the port index
only add ports to a VLAN as tagged members.
2.
VLAN 1 is the default untagged VLAN containing all ports on the switch, and can only be modified
by first reassigning the default port VLAN ID. See
-Untagged:
Interface is a member of the VLAN. All packets transmitted by
the port will be untagged, that is, not carry a tag and therefore
not carry VLAN or CoS information. Note that an interface
must be assigned to at least one group as an untagged port.
-Forbidden:
Interface is forbidden from automatically joining the VLAN via
GVRP. For more information, see
Registration".
-None:
Interface is not a member of the VLAN. Packets associated
with this VLAN will not be transmitted by the interface.
Indicates if a port is a member of a trunk.
To add a trunk to the selected VLAN, use the last table on the VLAN Static Table
page.
(VLAN Static Membership by
User's Manual of SGSD-1022 / SGSD-1022P
Port). However, note that this configuration page can
VLAN Port
Configuration.
183
SGSW-2840 / SGSW-2840P
"Automatic VLAN
Hide quick links:
Advertisement
Table of Contents
