Ip Igmp Max-Groups Action - Planet SGSD-1022 User Manual

throttling settings of the first port member in the trunk.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#ip igmp max-groups 10
Console(config-if)#

ip igmp max-groups action

This command sets the IGMP throttling action for an interface on the switch.
Syntax
ip igmp max-groups action {replace | deny}
replace - The new multicast group replaces an existing group.
deny - The new multicast group join report is dropped.
Default Setting
Deny
Command Mode
Interface Configuration
Command Usage
When the maximum number of groups is reached on a port, the switch can take one of two actions; either "deny" or
"replace." If the action is set to deny, any new IGMP join reports will be dropped. If the action is set to replace, the switch
randomly removes an existing group and replaces it with the new multicast group.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#ip igmp max-groups action replace
Console(config-if)#
show ip igmp filter
This command displays the global and interface settings for IGMP filtering.
Syntax
show ip igmp filter [interface interface] interface
• ethernet unit/port
-unit - Stack unit. (Range: 1)
User's Manual of SGSD-1022 / SGSD-1022P
655
SGSW-2840 / SGSW-2840P