Table of Contents
Advertisement
1.
Click Port, LACP, Aggregation Port.
2.
Set the System Priority, Admin Key, and Port Priority for the Port Actor.
3.
You can optionally configure these settings for the Port Partner. (Be aware that these settings only affect the
administrative state of the partner, and will not take effect until the next time an aggregate link is formed with this device.)
Figure 4-5-14 Aggregation Port page screenshot
Figure 4-5-15 Aggregation Port page screenshot
139
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Hide quick links:
Advertisement
Table of Contents
