Show Ip Access-List - Planet SGSD-1022 User Manual

This permits all TCP packets from class C addresses 192.168.1.0 with the TCP control code set to "SYN."
Console(config-ext-acl)#permit tcp 192.168.1.0 255.255.255.0 any
control-flag 2
Console(config-ext-acl)#
Related Commands
access-list ip

show ip access-list

This command displays the rules for configured IP ACLs.
Syntax
show ip access-list {standard | extended} [acl_name]
standard – Specifies a standard IP ACL.
extended – Specifies an extended IP ACL.
acl_name – Name of the ACL. (Maximum length: 16 characters)
Command Mode
Privileged Exec
Example
Console#show ip access-list standard
IP standard access-list david:
permit host 10.1.1.21
permit 168.92.0.0 255.255.255.0
Console#
Related Commands
permit, deny
ip access-group
User's Manual of SGSD-1022 / SGSD-1022P
501
SGSW-2840 / SGSW-2840P