Interface - Planet SGSD-1022 User Manual

broadcast byte-rate
switchport broadcast
clear counters
show interfaces status
show interfaces counters
show interfaces switchport

interface

This command configures an interface type and enters interface configuration mode. Use the no form to remove a trunk.
Syntax
interface interface
no interface port-channel channel-id
interface
ethernet unit/port
-unit - Stack unit. (Range: 1)
-port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-12)
• vlan vlan-id (Range: 1-4094)
Default Setting
None
Command Mode
Global Configuration
Example
To specify port 24, enter the following command:
Console(config)#interface ethernet 1/24
Console(config-if)#
description
This command adds a description to an interface. Use the no form to remove the description.
Syntax
description string
no description
Configures the broadcast storm control threshold
Enables broadcast storm control on an interface
Clears statistics on an interface
Displays status for the specified interface
Displays statistics for the specified interfaces
Displays the administrative and operational status of aninterface
Table 4-52 Interface Commands
512
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
GC
IC
PE
NE, PE
NE, PE
NE, PE