Show Interfaces Switchport - Planet SGSD-1022 User Manual

show interfaces switchport

This command displays the administrative and operational status of the specified interfaces.
Syntax
show interfaces switchport [interface] interface
• ethernet unit/port
-unit - Stack unit. (Range: 1)
-port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-12)
Default Setting
Shows all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.
Example
Example
This shows the configuration setting for port 2.
Console#show interfaces switchport ethernet 1/2
Information of Eth 1/2
Broadcast Threshold:
LACP Status:
Ingress Rate Limit:
Egress Rate Limit:
VLAN Membership Mode: Hybrid
Ingress Rule:
Acceptable Frame Type:
Native VLAN:
Priority for Untagged Traffic: 0
GVRP Status:
Allowed VLAN:
Forbidden VLAN:
Private-VLAN Mode:
Private-VLAN host-association: NONE
Private-VLAN Mapping: NONE
802.1Q-tunnel Status: Disable
Enabled, scale:1000K level:5 octets/second
Disabled
Disabled, scale:10M level:1
Disabled, scale:10M level:1
Enabled
All frames
1
Disabled
1(u),4093(t),
NONE
User's Manual of SGSD-1022 / SGSD-1022P
522
SGSW-2840 / SGSW-2840P