Radius-Server Retransmit - Planet SGSD-1022 User Manual

length: 48 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#radius-server key green
Console(config)#

radius-server retransmit

This command sets the number of retries. Use the no form to restore the default.
Syntax
radius-server retransmit number_of_retries no radius-server retransmit
number_of_retries -Number of times the switch will try to authenticate logon access via the RADIUS server. (Range: 1-30)
Default Setting
2
Command Mode
Global Configuration
Example
Console(config)# radius-server retransmit 5
Console(config)#
radius-server timeout
This command sets the interval between transmitting authentication requests to the RADIUS server. Use the no form to restore
the default.
Syntax
radius-server timeout number_of_seconds no radius-server timeout
number_of_seconds -Number of seconds the switch waits for a reply before resending a request. (Range: 1-65535)
Default Setting
5
Command Mode
Global Configuration
User's Manual of SGSD-1022 / SGSD-1022P
430
SGSW-2840 / SGSW-2840P