Snmpv3 Remote Engine Id - Planet SGSD-1022 User Manual

The page includes the following fields:
Object
Engine ID
Default
Save

4.3.3.2 SNMPv3 Remote Engine ID

To send inform messages to a SNMPv3 user on a remote device, you must first specify the engine identifier for the SNMP agent
on the remote device where the user resides. The remote engine ID is used to compute the security digest for authenticating
and encrypting packets sent to a user on the remote host.
SNMP passwords are localized using the engine ID of the authoritative agent. For informs, the authoritative SNMP agent is the
remote agent. You therefore need to configure the remote agent's SNMP engine ID before you can send proxy requests or
informs to it.
(See "Specifying Trap Managers and Trap
A new engine ID can be specified by entering 10 to 64 hexadecimal characters. If an odd number of characters are specified,
the last character is dropped. For example, entering the value "12345678901" sets the engine ID as "1234567890".
The page includes the following fields:
Object
Remote Engine ID
Remote IP Host
Description
A SNMPv3 engine is an independent SNMP agent that resides on the Managed
Switch
Sets the default
Saves the setting
Types" and "Configuring Remote SNMPv3
Figure 4-3-5 SNMPv3 Remote Engine ID page screenshot
Description
Specifies the Remote Engine ID (5-32 octets)
Specifies the IP address of the Remote IP Host.
User's Manual of SGSD-1022 / SGSD-1022P
102
SGSW-2840 / SGSW-2840P
Users".)