Command Line Processing - Planet SGSD-1022 User Manual

Policy Map
Server Group
VLAN
For example, you can use the following commands to enter interface configuration mode, and then return to Privileged Exec
mode
Console(config)# interface ethernet 1/5
Console(config-if)# exit
Console(config)#

5.2.12 Command Line Processing

Commands are not case sensitive. You can abbreviate commands and parameters as long as they contain enough letters to
differentiate them from any other currently available commands or parameters. You can use the Tab key to complete partial
commands, or enter a partial command followed by the "?" character to display a list of possible matches. You can also use the
following editing keystrokes for command-line processing:
Keystroke
Ctrl-A
Ctrl-B
Ctrl-C
Ctrl-E
Ctrl-F
Ctrl-K
Ctrl-L
Ctrl-N
Ctrl-P
Ctrl-R
Ctrl-U
Ctrl-W
Esc-B
Esc-D
Esc-F
Delete key or
backspace key
policy map
aaa group server radius
aaa group server tacacs+
vlan database
Table 5-2 Configuration Modes
Function
Shifts cursor to start of command line.
Shifts cursor to the left one character.
Terminates the current task and displays the command prompt.
Shifts cursor to end of command line.
Shifts cursor to the right one character.
Deletes all characters from the cursor to the end of the line.
Repeats current command line on a new line.
Enters the next command line in the history buffer.
Enters the last command.
Repeats current command line on a new line.
Deletes from the cursor to the beginning of the line.
Deletes the last word typed.
Moves the cursor back one word.
Deletes from the cursor to the end of the word.
Moves the cursor forward one word.
Erases a mistake when entering a command.
Table 5-3 Command Line Processing
User's Manual of SGSD-1022 / SGSD-1022P
Console(config-pmap)
Console(config-sg-radius)
Console(config-sg-tacacs+)
Console(config-vlan)
347
SGSW-2840 / SGSW-2840P