Showing Commands - Planet SGSD-1022 User Manual

using the "?" character to list keywords or parameters.

5.2.5 Showing Commands

If you enter a "?" at the command prompt, the system will display the first level of keywords for the current command class
(Normal Exec or Privileged Exec) or configuration class (Global, ACL, Interface, Line or VLAN Database). You can also display
a list of valid keywords for a specific command. For example, the command "show ?" displays a list of possible show
commands:
Console# show ?
access-group
access-list
accounting
banner
bridge-ext
calendar
class-map
cluster
dot1q-tunnel
dot1x
garp
gvrp
history
interfaces
ip
lacp
line
lldp
log
logging
mac
mac-address-table
management
map
mvr
network-access
policy-map
port
private-vlan
Access groups
Access lists
Uses an accounting list with this name
Banner info
Bridge extension information
Date and time information
Displays class maps
Display cluster
dot1q-tunnel
802.1x content
GARP properties
GVRP interface information
History information
Interface information
IP information
LACP statistics
TTY line information
LLDP
Login records
Logging setting
MAC access list
Shows the MAC address table
Show management information
Maps priority
Show mvr interface information
Shows the entries of the secure port.
Displays policy maps
Port characteristics
Private VLAN
User's Manual of SGSD-1022 / SGSD-1022P
342
SGSW-2840 / SGSW-2840P