Show Mac-Address-Table Multicast - Planet SGSD-1022 User Manual

See "Configuring IGMP Snooping and Query Parameters" on page 3-239 for a description of the displayed items.
Example
The following shows the current IGMP snooping configuration: .
Console#show ip igmp snooping
Service status:
Querier status:
Leave proxy status:
Query count:
Query interval:
Query max response time: 20 sec
Router port expire time: 300 sec
Immediate Leave Processing: Disabled on all VLAN
IGMP snooping version: Version 2
Console#

show mac-address-table multicast

This command shows known multicast addresses.
Syntax
show mac-address-table multicast [vlan vlan-id] [user | igmp-snooping]
vlan-id - VLAN ID (1 to 4094)
user -Display only the user-configured multicast entries.
igmp-snooping -Display only entries learned through IGMP snooping.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Member types displayed include IGMP or USER, depending on selected options.
Example
The following shows the multicast entries learned through IGMP snooping for VLAN 1:
Console#show mac-address-table multicast vlan 1 igmp-snooping
VLAN M'cast IP addr. Member ports Type
Enabled
Enabled
Disabled
10
100 sec
645
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P