Lldp Basic-Tlv System-Name - Planet SGSD-1022 User Manual

Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv system-description
Console(config-if)#

lldp basic-tlv system-name

This command configures an LLDP-enabled port to advertise the system name. Use the no form to disable this feature.
Syntax
[no] lldp basic-tlv system-name
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The system name is taken from the sysName object in RFC 3418, which contains the system's administratively assigned
name, and is in turn based on the hostname command (page 4-16).
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv system-name
Console(config-if)#
lldp dot1-tlv proto-ident
This command configures an LLDP-enabled port to advertise the supported protocols. Use the no form to disable this feature.
Syntax
[no] lldp dot1-tlv proto-ident
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises the protocols that are accessible through this interface.
Example
User's Manual of SGSD-1022 / SGSD-1022P
606
SGSW-2840 / SGSW-2840P