Lldp - Planet SGSD-1022 User Manual

4.2.12 LLDP

Link Layer Discovery Protocol (LLDP) is used to discover basic information about neighboring devices on the local broadcast
domain. LLDP is a Layer 2 protocol that uses periodic broadcasts to advertise information about the sending device. Advertised
information is represented in Type Length Value (TLV) format according to the IEEE 802.1ab standard, and can include details
such as device identification, capabilities and configuration settings. LLDP also defines how to store and maintain information
gathered about the neighboring network nodes it discovers.
Link Layer Discovery Protocol - Media Endpoint Discovery (LLDP-MED) is an extension of LLDP intended for managing
endpoint devices such as Voice over IP phones and network switches. The LLDP-MED TLVs advertise information such as
network policy, power, inventory, and device location details. LLDP and LLDP-MED information can be used by SNMP
applications to simplify troubleshooting, enhance network management, and maintain an accurate network topology.
4.2.12.1 LLDP Configuration
Setting LLDP Timing Attributes
Use the LLDP Configuration screen to set attributes for general functions such as globally enabling LLDP on the Managed
Switch, setting the message ageout time, and setting the frequency for broadcasting general advertisements or reports about
changes in the LLDP MIB.
The page includes the following fields:
Object
LLDP
Transmission Interval
Figure 4-2-27 LLDP Configuration page screenshot
Description
Enables LLDP globally on the switch.
Default: Enabled
Configures the periodic transmit interval for LLDP advertisements.
Range: 5-32768seconds;
81
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P