Setting The System Clock - Planet SGSD-1022 User Manual

SMTP servers
1. 192.168.1.4
SMTP minimum severity level: 4
SMTP destination email addresses
1. supports@planet.com.tw
SMTP source email address: kentk@planet.com.tw
SMTP status:
Console#

Setting the System Clock

Console(config)#sntp server 10.1.0.19 137.82.140.80 128.250.36.2
Console(config)#sntp poll 60
Console(config)#sntp client
Console(config)#exit
Console#show sntp
Current time: Jan 6 14:56:05 2004
Poll interval: 60
Current mode: unicast
SNTP status : Enabled
SNTP server 10.1.0.19 137.82.140.80 128.250.36.2
Current server: 128.250.36.2
Console#
Setting the Time Zone
SNTP uses Coordinated Universal Time (or UTC, formerly Greenwich Mean Time, or GMT) based on the time at the Earth's
prime meridian, zero degrees longitude. To display a time corresponding to your local time, you must indicate the number of
hours and minutes your time zone is east (before) or west (after) of UTC.
Console# calendar set 17 46 00 october 18 2007
Console# show calendar
17:46:11 October 18 2007
Console#
Enabled
User's Manual of SGSD-1022 / SGSD-1022P
672
SGSW-2840 / SGSW-2840P