Command Usage
Any multicast groups that use the MVR VLAN must be statically assigned to it under the MVR Configuration menu (see
"Configuring Global MVR Settings".
The IP address range from 224.0.0.0 to 239.255.255.255 is used for multicast streams. MVR group addresses cannot fall
within the reserved IP multicast address range of 224.0.0.x.
1.
Click MVR, Group Member Configuration.
2.
Select a port or trunk from the "Interface" field, and click Query to display the assigned multicast groups.
3.
Select a multicast address from the displayed lists, and click the Add or Remove button to modify the Member list.
The page includes the following fields:
Object
Interface
Member
Non-Member
Figure 4-9-14 MVR Static Group Member page screenshot
Description
Indicates a port or trunk.
Shows the IP addresses for MVR multicast groups which have been statically
assigned to the selected interface.
Shows the IP addresses for all MVR multicast groups which have not been
statically assigned to the selected interface.
User's Manual of SGSD-1022 / SGSD-1022P
223
SGSW-2840 / SGSW-2840P