Planet SGSD-1022 User Manual page 221

- Immediate leave does not apply to multicast groups which have been statically assigned to a port.
The page includes the following fields:
Object
MVR Type
Immediate Leave
Trunk
Figure 4-9-12 MVR Port Configuration page screenshot
Description
The following interface types are supported:
-Source An uplink port that can send and receive multicast data for the
groups assigned to the MVR VLAN. Note that the source port must
be manually configured as a member of the MVR VLAN (see
"Adding Static Members to VLANs (VLAN Index)" ).
-Receiver A subscriber port that can receive multicast data sent through the
MVR VLAN. Any port configured as an receiver port will be
dynamically added to the MVR VLAN when it forwards an IGMP
report or join message from an attached host requesting any of the
designated multicast services supported by the MVR VLAN.
-Non-MVR An interface that does not participate in the MVR VLAN.
Default type : Non-MVR
Configures the switch to immediately remove an interface from a multicast
stream as soon as it receives a leave message for that group.
(This option only applies to an interface configured as an MVR receiver.)
Shows if port is a trunk member.
User's Manual of SGSD-1022 / SGSD-1022P
221
SGSW-2840 / SGSW-2840P