Show Calendar - Planet SGSD-1022 User Manual

show calendar

This command displays the system clock.
Default Setting
None
4-62
Command Mode
Normal Exec, Privileged Exec
Example
Console#show calendar
15:12:43 April 1 2004
Console#
5.10 Switch Cluster Commands
Switch Clustering is a method of grouping switches together to enable centralized management through a single unit. Switches
that support clustering can be grouped together regardless of physical location or switch type, as long as they are connected to
the same local network.
Command
cluster
cluster commander
cluster ip-pool
cluster member
rcommand
show cluster
show cluster members
show cluster candidates
Using Switch Clustering
A switch cluster has a primary unit called the "Commander" which is used to manage all other "Member" switches in the cluster.
The management station uses both Telnet and the web interface to communicate directly with the Commander through its IP
address, while the Commander manages Member switches using the cluster's "internal" IP addresses.
Once a switch has been configured to be a cluster Commander, it automatically discovers other cluster-enabled switches in the
network. These "Candidate" switches only become cluster Members when manually selected by the administrator through the
Function
Configures clustering on the switch
Configures the switch as a cluster Commander
Sets the cluster IP address pool for Members
Sets Candidate switches as cluster members
Provides configuration access to Member switches
Displays the switch clustering status
Displays current cluster Members
Displays current cluster Candidates in the network
Table 5-20 Switch Cluster Commands
403
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Mode
GC
GC
GC
GC
GC
PE
PE
PE