Configure Ip Address - Planet ISW-1022MT Quick Installation Manual

6. Configure IP address

The Managed Industrial Switch is shipped with default IP address as following.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Managed
Industrial Switch, please use the procedures as follow:
n Show the current IP address
1. On "Switch>" prompt, enter "enable" to enter Privileged EXEC mode.
2. On "Switch #" prompt, enter "show ip".
3. The screen displays the current IP address, Subnet Mask and Gateway. As show
in Figure 6-1.
n Configure IP address
4. On "Switch#" prompt, type "configure" to enter the configuration Mode.
5. On "Switch(config)#" prompt, enter the following command and press
<Enter>. As show in Figure 6-2.

Figure 6-1 Show IP information screen