Planet SGSD-1022 User Manual page 186

Object
PVID
Acceptable Frame
Type
Ingress Filtering
GVRP Status
GARP Join Timer*
Description
VLAN ID assigned to untagged frames received on the interface.
(Default: 1)
If an interface is not a member of VLAN 1 and you assign its PVID to this VLAN,
the interface will automatically be added to VLAN 1 as an untagged member.
For all other VLANs, the PVID must be defined first, then the status of the VLAN
can be configured as a tagged or untagged member.
Sets the interface to accept all frame types, including tagged or untagged frames,
or only tagged frames.
Options:
All
Tagged
When set to receive all frame types, any received frames that are untagged are
assigned to the default VLAN.
(Default: All )
Determines how to process frames tagged for VLANs for which the ingress port
is not a member. Ingress Filtering is always enabled.
(Default: Enabled)
- Ingress filtering only affects tagged frames.
- If ingress filtering is disabled and a port receives frames tagged for VLANs
for which it is not a member, these frames will be flooded to all other ports
(except for those VLANs explicitly forbidden on this port).
- If ingress filtering is enabled and a port receives frames tagged for VLANs for
which it is not a member, these frames will be discarded. -Ingress filtering
does not affect VLAN independent BPDU frames, such as GVRP or STP.
However, they do affect VLAN dependent BPDU frames, such as GMRP.
Enables/disables GVRP for the interface.
GVRP must be globally enabled for the switch before this setting can take effect.
(See "GVRP Status(Global
received on this port will be discarded and no GVRP registrations will be
propagated from other ports.
(Default: Disabled)
The interval between transmitting requests/queries to participate in a VLAN
group.
Range: 20-1000 centiseconds
Default: 20 centiseconds
186
User's Manual of SGSD-1022 / SGSD-1022P
Setting)".) When disabled, any GVRP packets
SGSW-2840 / SGSW-2840P