Disconnect - Planet SGSD-1022 User Manual

disconnect

This command terminates an SSH, Telnet, or console connection.
Syntax
disconnect session-id
session-id – The session identifier for an SSH, Telnet or console
connection. (Range: 0-4)
Command Mode
Privileged Exec
Command Usage
Specifying session identifier "0" will disconnect the console connection. Specifying any other identifiers for an active
session will disconnect an SSH or Telnet connection.
Example
Console#disconnect 1
Console#
Related Commands
show ssh
show users
show line
This command displays the terminal line's parameters.
Syntax
show line [console | vty]
console -Console terminal line.
vty - Virtual terminal for remote console access (i.e., Telnet).
Default Setting
Shows all lines
Command Mode
Normal Exec, Privileged Exec
Example
To show all lines, enter this command:
Console#show line
Console Configuration:
User's Manual of SGSD-1022 / SGSD-1022P
387
SGSW-2840 / SGSW-2840P