Table of Contents
Advertisement
Configure IP address
The Managed Switch is shipped with default IP address as follows:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Managed Switch, please use the procedures as follows:
Display of the current IP address
1.
On"GS-4210-24P2S#" prompt, enter "show ip".
2.
The screen displays the current IP address, Subnet Mask and Gateway shown in
Configuration of the IP address
3.
On " GS-4210-24P2S#" prompt, enter "configure".
4.
On "GS-4210-24P2S (config)#" prompt, enter the following command and press <Enter> as shown in
GS-4210-24P2S (config)# ip address 192.168.1.100 mask 255.255.255.0
GS-4210-24P2S (config)# ip default-gateway 192.168.1.254
The previous command would apply the following settings for the Managed Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 5-2: IP Information Screen
359
User's Manual of GS-4210 Series
Figure
5-2.
Figure
5-3.
Advertisement
Table of Contents
