Configuration Commands - Planet SGSD-1022 User Manual

5.2.11 Configuration Commands

Configuration commands are privileged level commands used to modify switch settings. These commands modify the running
configuration only and are not saved when the switch is rebooted. To store the running configuration in non-volatile storage, use
the copy running-config startup-config command.
The configuration commands are organized into different modes:
Global Configuration -
Access Control List Configuration -
Class Map Configuration -
Interface Configuration -
Line Configuration -
Multiple Spanning Tree Configuration - These commands configure settings for the selected multiple spanning tree
Policy Map Configuration -
VLAN Configuration -
To enter the Global Configuration mode, enter the command configure in Privileged Exec mode. The system prompt will
change to "Console(config)#" which gives you access privilege to all Global Configuration commands.
Console# configure
Console(config)#
To enter the other modes, at the configuration prompt type one of the following commands. Use the exit or end command to
return to the Privileged Exec mode.
Mode
Line
Access Control
List
Class Map
Interface
MSTP
These commands modify the system level configuration, and include
commands such as hostname and snmp-server community.
These commands are used for packet filtering.
Creates a DiffServ class map for a specified traffic type.
These commands modify the port configuration such as speed-duplex and
negotiation.
These commands modify the console port and Telnet configuration, and
include command such as parity and data bits.
instance.
Creates a DiffServ policy map for multiple interfaces.
Includes the command to create VLAN groups.
Command
line {console | vty}
access-list ip standard
access-list ip extended
access-list mac
class map
interface {ethernet port |
port-channel id| vlan id}
spanning-tree
mst-configuration
User's Manual of SGSD-1022 / SGSD-1022P
Prompt
Console(config-line)#
Console(config-std-acl)
Console(config-ext-acl)
Console(config-mac-acl)
Console(config-cmap)
Console(config-if)#
Console(config-mstp)#
346
SGSW-2840 / SGSW-2840P