Timebase:window:position - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

:TIMebase:WINDow:POSition

Command Syntax
:TIMebase:WINDow:POSition <pos value>
<pos value> ::= time from the trigger event to the zoomed (delayed)
The :TIMebase:WINDow:POSition command sets the horizontal position in
the zoomed (delayed) view of the main sweep. The main sweep range and
the main sweep horizontal position determine the range for this command.
The value for this command must keep the zoomed view window within
the main sweep range.
Query Syntax
:TIMebase:WINDow:POSition?
The :TIMebase:WINDow:POSition? query returns the current horizontal
window position setting in the zoomed view.
Return Format
<value><NL>
<value> ::= position value in seconds
See Also
•
•
•
•
•
•
•
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
(see page 790)
view reference point in NR3 format
"Introduction to :TIMebase Commands"
":TIMebase:MODE" on page 579
":TIMebase:POSition"
":TIMebase:RANGe" on page 581
":TIMebase:SCALe" on page 583
":TIMebase:WINDow:RANGe"
":TIMebase:WINDow:SCALe"
on page 578
on page 580
on page 586
on page 587
28
:TIMebase Commands
585