Status Message - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

5.1.2.1 Status Message

The printer shows the status message when:


The printer is free from any error.


The printer is initializing. Note only one status message is
applied to describe the current printer status.
ROM Check
Indicates that ROM check and format check are in process.
RAM Check
Indicates that RAM's operation and memory checks are in process.
Self Test
Testing and initializing the printer.
Reset All
The printer is warmbooting, which is followed by reset operation with
the message "Reset" indicated.
Reset
Resets the printer.
Job Cancel
Job is being canceled.
Chapter 5 Troubleshooting
Reset To Save
Appears when the print settings were changed during printing.
Perform one of the following to clear the message.
1. Press the On Line button to override the error and continue
printing. However, the changes are not effective until the
ongoing job is completed.
Note pressing the "Continue" button is not effective.
2. Reset the printer or perform a warm boot for a instant change of
the setting, but be aware that this erases any print data in the
printer's memory.
Writing ROM A
The printer is writing data to the form overlay ROM module. Do not
remove the module or switch off power until finished.
Writing ROM P
The printer is writing program data to the program ROM module. Do
not remove the module or switch off power until finished.
Form Feed
The "Form Feed" button has been pressed to forcibly print out the
remaining print data and eject the sheet.
Warming Up
A "Ready" message that indicates the printer is warming up.
Calibrating Printer
A "Ready" message that indicates the engine is calibrating.
Revision A
5-3