Diagnostic Commander: Operations; Starting The Diagnostic Commander; Setting Up The Communication - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

4.2.4 Diagnostic Commander: Operations

4.2.4.1 Starting the Diagnostic Commander

Start/End the Diagnostic Commander as follows:
1. Start Windows 95, select [Start]-[Programs] from the [Start] menu,
then select the [Renoir Service Commander V2.01]-[RCV2].
2. Turn on the printer.
3. To close the Diagnostic Commander, click the [Close] button.
Chapter 4 Diagnostics

4.2.4.2 Setting Up the Communication

Establish communication between the computer and the Diagnostic
Commander as follows:
1. Select [Manual] or [Auto] depending on the menu you want to
select.
2. Click the [Connect] button to set up and connect the communication
port.
3. Click the [Sync] button to establish communication.
NOTE:Click the [Service] button to establish the communication.
NOTE:Click the [Disconnect] button first to go to another menu from
the [Manual] or [Auto] menu.
[Manual] tab window
Revision A
4-9