Wiring Diagram - §8 - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200
A.3.3.8 Wiring Diagram - §8
Table A-29. Wiring Diagram - §8
Signal Name
OIL CAM SOLENOID ON (L) Control signal to turn the Oil Cam Solenoid ON/
24VDC OFF.
EXCHANGE SOLENOID PUSH Control signal to turn ON/OFF the Exchange
ON ( L) 24VDC Solenoid in the push direction (Face-Up ejection).
EXCHANGE SOLENOID PULL Control signal to turn ON/OFF the Exchange
ON (L) 24VDC Solenoid in the pull direction (Face-Down ejection).
CLEANER CAM SOLENOID Control signal to turn the Cleaner Cam Solenoid
ON (L) 24VDC ON/OFF.
FUSER CHUTE FAN ON (H) Control signal to turn the Fuser Chute Fan ON/
24VDC OFF.
FUSER IN PAPER SENSED (L) Signal from the Fuser In Sensor to detect the paper
5VDC in the Fuser.
ENVIRONMENT TEMP. Signal that holds the environment temperature
data. (Analog) (The temperature is measured by
the Thermistor in the Environment Sensor.)


Oil Cam Solenoid coil resistance: 220


Exchange Solenoid coil resistance: 45
[24VDC signals]


Cleaner Cam Solenoid coil resistance: 220


Fuser Chute Fan

Number of polarities: 4

Number of rotations: 5000 1000rpm
Chapter A Appendix
Description
10% (20 C)
10% (20 C)
10% (20 C)
Revision A
A-47