Fip-1.42 Controller Pwb (Ic13, Ic14) Related Error; Fip-1.43 Dimm (P) Related Error - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

FIP-1.42 CONTROLLER PWB (IC13, IC14) Related Error

Step Check point
Perform the preliminary inspection below:
• Remove all electrical unit modules to return the printer
to the standard condition.
1
• Check that all connectors are properly connected to the
CONTROLLER PWB.
Check: Defective IC
Replace IC according to the error type as follows:
- Error C1100: Replace IC14.
2
- Error C1101: Replace IC13.

Does the problem still occur?

FIP-1.43 DIMM (P) Related Error

Step Check point
Perform the preliminary inspection below:
• Remove all electrical unit modules to return the printer
1 to the standard condition.
• Check that all connectors are properly connected to the
CONTROLLER PWB.
Check: DIMM
Replace the DIMM as described below:
• Format the currently installed DIMM and then load the
2
latest program.
• Format a new DIMM and load the latest program.

Does the problem still occur?
Chapter 5 Troubleshooting
Yes
Replace/reinstall the defective part(s).
Replace the CONTROLLER PWB.
Yes
Replace/reinstall the defective part(s).
Replace the CONTROLLER PWB.
Remedy
No
Go to Step 2.
Problem solved.
Remedy
No
Go to Step 2.
Problem solved.
Revision A
5-58