Details Of Menus And Settings - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200
*17: Indicated neither on the panel nor status sheet. Can be set in EJL.
*18: The value is automatically changed to "No" after the printer returns
to an on-line status.
*19: Appears only when "Network Config = Yes" or "AUX Config = Yes".
*20: Setting condition depends on the setting conditions for the Type-B
level 3 board.
*21: Appears only when an optional font module is inserted in the
optional ROM DIMM socket.
*22: Either "Pitch" of "Height" is indicated, which varies depending on
the type of the font selected, as shown below.
"Pitch": A fixed-pitch font is selected.
"Height": A proportional-spacing font is selected.
*23: If "LJ4 Menu" >"SymSet" value is changed to this symbol set, "Font
Source" changes to "Resident" and "Font Number" changes to "0".
To print with this symbol set, therefore, "Font Source" and "Font
Number" must be set to a font that supports this symbol set.
*24: Appears only in the GLlike mode.
*25: Appears only when the Support Mode is activated with the power-
on service function.
*26: Appears only when the Maintenance Mode is activated with the
power-on service function. Always printed in English regardless of
the selected language in "Setup menu".
*27: Appears only when HDD Unit is installed.
Table 1-34 shows the user setting items that are not included in the
SelecType setting menu.
Table 1-34. User Setting Items
Setting items Setting value
Printer Name 32-byte character string EPL-C8200
MFG of the Device ID 32-byte character string (Undefined)
MDL of the Device ID 32-byte character string (Undefined)
DES of the Device ID 32-byte character string (Undefined)
CID of the Device ID 32-byte character string (Undefined)
Chapter 1 Product Descriptions
Initial value Setting method
EJL, PrinterName
command
EJL
EJL
EJL
EJL

1.6.3 Details of Menus and Settings

This section contains the EPL-C8200-specific information on the menus
and settings.
Printing Menu
 Paper Source
Selects the paper source when " Paper Type " =
Normal 
Auto: Paper is fed from the paper source that holds the
selected paper type and size.
MP: Paper is fed from the MP tray.
LC1: Paper is fed from the 1st paper cassette.
LC2: Paper is fed from the 2nd paper cassette.
LC3: Paper is fed from the 3rd paper cassette.
LC4: Paper is fed from the 4th paper cassette.


If paper size is set to an envelope size, paper is fed from the MP
tray.


If " Paper Type " is set to "Thick" or "Trnsprnc", paper is fed from
the MP tray.
2. Wide A4
Effective only in the LJ4 mode.
Off: Printable area for graphics remains the ordinal
size.
On: Printable area for graphics is expanded.
Revision A
1-39