EPSON ColorPage EPL-C8200
FIP-1.40 DIMM (SLOT P) Related Error
Step
Check point
Perform the preliminary inspection below:
• Remove all optional electrical unit modules to return the
printer to the standard condition.
1
• Check that all connectors are properly connected to the
CONTROLLER PWB.
• Check that the DIMM is inserted properly.
Check: DIMM
• Format the DIMM and write the control program to it.
2
NOTE: Make sure DIMM is installed in the correct direction
and locked in the socket securely.
Does the problem still occur?
Chapter 5
Troubleshooting
Yes
Replace/reinstall the defective part(s).
Replace/reinstall the defective part.
Remedy
No
Go to Step 2.
-
Revision A
5-56