Rotary Sensor Removal (Pl7.2.22) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.10.4 ROTARY SENSOR Removal (PL7.2.22)

1. Remove the REAR COVER ASSEMBLY. (See Section 3.2.4.5.)
2. Release the harness from the hook on the FAN DUCT.
3. Disconnect the connector (P/J82) for the DEVE. FAN.
4. Remove the screw (black, cup head, 8mm) securing the FAN
DUCT, and shift the FAN DUCT upward to release the hooks from
the frame. Then remove the FAN DUCT along with the DEVE. FAN.
Figure 3-69. ROTARY SENSOR Removal (1/2)
5. Disconnect the connector (P/J58) for the ROTARY SENSOR.
6. Remove the screw (silver, 6mm) securing the ROTARY SENSOR
ASSEMBLY and remove the ROTARY SENSOR ASSEMBLY.
7. Unhook the ROTARY SENSOR from the ROTARY SENSOR
PLATE and remove the ROTARY SENSOR.
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-70. ROTARY SENSOR Removal (2/2)
When routing the harnesses, do not let it touch the
gears.
Revision A
3-60