Fip-1.28 P/H Motor Related Error - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

FIP-1.28 P/H MOTOR Related Error

Step Check point
Perform the preliminary inspection.
Parts to inspect:
P/H MOTOR ASSY, HEAT ROLL, PRESSURE ROLL,
1
FUSER ASSY, BELT CLEANER ASSY, EXIT LOWER
ASSY, FEED ROLL ASSY, MAIN P/H ASSY, WASTE
TONER BOX, 2ND BTR CAM ASSY, AUGER HIGH
ASSY, MCU PWB
Isolation: Engine or Controller?
Run the Engine test print or diagnostic test print.
2
(10 sheets for each of single and continuous print)

Are the outputs normal?
Check: P/H Motor rotation

3
Does the P/H Motor rotate slightly and then stops
during the test print?
Check: P/H Motor rotation

4
Is the P/H Motor motionless at all during the test print?
Check: Drive transmission
Rotate the rotor in the P/H MOTOR ASSY manually
5
counterclockwise.

Does the rotor in the P/H MOTOR ASSY rotate
smoothly?
Check: FUSER ASSY
Rotate the INPUT GEAR FT1 manually.

6
Do the HEAT ROLL and PRESSURE ROLL rotate
smoothly?
Check: BELT CLEANER ASSY
7
Turn the gear manually.

Does the BELT CLEANER ASSY rotate smoothly?
(To be continued.)
Chapter 5 Troubleshooting
Yes
Replace/reinstall the defective part(s).
Check the Controller PWB.
If the problem still occurs, go to step 3.
Go to Step 5.
Go to FIP-2.34 "P/H MOTOR ASSY is
Defective".
Go to FIP-2.34 "P/H MOTOR ASSY is
Defective".
Go to Step 7.
Go to Step 8.
Remedy
No
Go to Step 2.
Go to Step 3.
Go to Step 4.
Replace the MCU PWB.
Go to Step 6.
Replace the interfering part.
Replace the BELT CLEANER ASSY.
Revision A
5-46