Ethernet Interface - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

1.3.2 Ethernet Interface


Interface type*: 10BaseT
100BaseTX
Half Duplex
Full Duplex
*: Switched at power on

Communication protocol:
1. IPX/SPX (IPX, SPX, NCP, RIP, SAP, PrintServer,
RemotePrinter, NDS, SNMP, ENPC)
2. NetBIOS (SMB)
NetBEUI
3. TCP/IP (IP, UDP, TCP, LPR, FTP, TELNET, APR, ICMP,
RARP, BOOTP, DHCP, SNMP, HTTP, ENPC)
4. AppleTalk (ELAP, DDP, ATP, PAP, AARP, NBP, ZIP, RTMP,
SNMP, ENPC)

Connector type: RJ45

Applicable cable: 2-pair STP (10BaseT, 100BaseTX)
NOTE: Use a shielded cable to meet FCC Class B, EN55022 Class
B, and VCCI Class B.

Pin configuration: See Table 1-23.

Entity type: See Section 3.3.3 Type B Interface.
Chapter 1 Product Descriptions
Table 1-23. Pin Configuration for the Ethernet I/F
Pin Signal Name
1 Tx+
2 Tx-
3 Rx+
4 N.C.
5 N.C.
6 Rx-
7 N.C.
8 N.C.
Revision A
I/O
O
O
I
-
-
I
-
-
1-24