Epson ColorPage EPL-C8200 Service Manual page 210

EPSON ColorPage EPL-C8200
18. Shift the SLIDE COLLAR inward and remove the IBT BEARING-4
from the frame.
19. Lift up the both ends of the IBT DEVE ROLL ASSEMBLY in the
TRANSFER ASSEMBLY about 20mm, then shift the front part of the
IBT DRIVE ROLL ASSEMBLY left and lift up the TRANSFER
ASSEMBLY to remove.
Figure 3-78. TRANSFER ASSEMBLY Removal (2/2)
Chapter 3 Disassembly and Assembly/Adjustment


When installing the IBT BELT ASSEMBLY, cover the
belt surface with paper to protect it.


When installing the TRANSFER ASSEMBLY, put the
TRANSFER ASSEMBLY wire inside the printer first,
then align the COLLAR-BUR in the TRANSFER
ASSEMBLY with the IBT FRONT BRACKET and the
IBT REAR BRACKET.
Figure 3-79. TRANSFER ASSEMBLY Installation


Route the harnesses tightly via the clamp.
Revision A
3-67