Epson ColorPage EPL-C8200 Service Manual page 341

Color laser printer
Hide thumbs Also See for ColorPage EPL-C8200:
Table of Contents

Advertisement

EPSON ColorPage EPL-C8200
Format Error ROM A
LED:
No effect on LED state.
Explanation:
If the ROM inserted in the slot A is new, take a
necessary action. If the message appears after a
writing operation, however, it means writing was not
executed properly or memory was damaged. In this
case, attempt writing again or turn the printer off and
remove the ROM module.
Solution:
Perform either of the following.
1. Press the Continue button.
2. Turn the printer off and remove the ROM module.
Format Error ROM B
LED:
No effect on LED state.
Explanation:
If the ROM inserted in the slot B is new, take a
necessary action. If the message appears after a
writing operation, however, it means writing was not
executed properly or memory was damaged. In this
case, attempt writing again or turn the printer off and
remove the ROM module.
Solution:
Perform either of the following.
1. Press the Continue button.
2. Turn the printer off and remove the ROM module.
Chapter 5
Troubleshooting
Maintenance Req hhhh
LED:
No effect on LED state.
Explanation:
A warning condition that cannot be corrected by the
user has occurred, and this condition requires
maintenance. Specifically, one or more of the internal
units that cannot be replaced by the user is
approaching the end of its life.
Solution:
Although the user can continue to operate the printer
until the "Service Req effff" error occurs, the user
should write down the warning code and call for
service before the service required state is reached;
otherwise the printer may stop working partway
through a print job. Do either of the following to clear
the warning message.
1. Press the Continue button.
2. Perform a Reset operation.
See the table below for the Maintenance-Call Error codes.
A: Warning is active.
I:
Warning is inactive.
Table 5-4. Maintenance-Call Error Message List
Warning content
Fuser Unit
Code: hhhh
near end of life
0001
A
0002
I
0003
A
0004
I
0005
A
0006
I
0007
A
*: The printer does not detect this condition because the printer's life ends earlier.
Revision A
IBT Cleaner
2nd BTR
near end of life*
near end of life
I
I
A
I
A
I
I
A
I
A
A
A
A
A
5-13

Advertisement

Table of Contents
loading

Table of Contents