Parameter Control - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

4.2.7.3 Parameter Control

 Do not use any other commands except LIFCNTSET
(80), CTLSET (85), LIFCNTR (D0), LIFLIMR (D1) and
CTLSETR (D7) unless instructed to do so in this
manual.
 Before replacing the MCU PWB, run the LIFCNTR (D0)
and CTLSETR (D7). Record the data from the
commands. After installing the new MCU PWB, write
the data.
NOTE: If the life counter value read by the LIFCNTR command is larger
than the life over value read by the LIFLIMR, write the life over
value in the LIFCNTSET command.
Chapter 4 Diagnostics
Revision A
4-53