Service] Tab - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

4.2.4.5 [Service] tab

On the [Service] tab page, you can write data (specifications) in the
MCU PWB EEPROM (NVM), set a password, read/write the Master and
read/initialize the Slave.
NOTE: Master: COMMUNICATION ASSEMBLY
Slave: MCU PWB NVM
If you click the [Service] tab, the communication is established and the
following screen appears.
Chapter 4 Diagnostics
NVM Write
You can write data (specifications) in the MCU PWB EEPROM (NVM).
NOTE: If you have replaced the MCU PWB, you need to run the [NVM
Write]. If you do not run [NVM Write], the specification settings
differ and the printer may not function properly.
1. Click the [NVM Write] button.
2. The specification (data file) selection screen appears.
3. From the list, select the data file (XXXX.DAT) that has the correct
specifications.
NOTE: "XXXX.DAT" files must be located in "\Renoir Service
Commander2.01\dat" folder, otherwise they are not displayed.
Table 4-6. Data File List
Serial No.
File Name
Header
GQ98.dat BTN0xxxxxx
GR86.dat BYM0xxxxxx
GR87.dat BYN0xxxxxx
GR88.dat BYP0xxxxxx
4. Click the [OK] button.
Revision A
For the Market
Japan
North America
Standard Europe
"North Europe, Australia, S.E. Asia"
4-13