Exchange Solenoid Removal (Pl9.3.16) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.12.15 EXCHANGE SOLENOID Removal (PL9.3.16)

1. Remove the EXIT TRAY ASSEMBLY. (See Section 3.2.13.1.)
2. Remove the OIL ROLL ASSEMBLY. (See Section 3.2.12.1.)
3. Remove the FUSER ASSEMBLY. (See Section 3.2.12.2.)
4. Remove the MAIN FUSER ASSEMBLY. (See Section 3.2.12.3.)
5. Remove the EXCHANGE CHUTE. (See Section 3.2.12.13.)
6. Remove the OIL CAM SOLENOID. (See Section 3.2.12.14.)
7. Disconnect the connector (P/J74) for the EXCHANGE SOLENOID
and release the harness from the clamp.
NOTE: In the following step, be careful not to drop the gear since it
will be disengaged when the EXCHANGE BRACKET is
removed.
8. Remove the screw (gold, tapped, 10mm) securing the SOLENOID
ASSEMBLY and remove the SOLENOID ASSEMBLY along with the
FUSER EARTH-B.
9. Remove 2 screws (silver, 3mm) securing the EXCHANGE
SOLENOID to the EXCHANGE BRACKET. Then remove the
EXCHANGE SOLENOID.
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-107. EXCHANGE SOLENOID Removal
Revision A
3-89