Fip-1.44 Dimm (Slot A, B) Related Error; Fip-1.45 Controller Pwb Eeprom (Ic20) Related Error - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

FIP-1.44 DIMM (Slot A, B) Related Error

Step Check point
Perform the preliminary inspection below:
• Remove all electrical unit modules to return the printer
to the standard condition.
1
• Check that all connectors are properly connected to the
CONTROLLER PWB.
Check: DIMM
• Check that the DIMM is installed in the correct direction
and locked in the socket securely?
2
• Check that the DIMM meets the specifications?

Does the problem still occur?

FIP-1.45 CONTROLLER PWB EEPROM (IC20) Related Error

Step Check point
Perform the preliminary inspection below:
• Remove all electrical unit modules to return the printer
to the standard condition.
1
• Check that all connectors are properly connected to the
CONTROLLER PWB.
Check: IC20
- Error C1200: Replace IC20.
2
- Error C1210: Replace IC20.

Does the problem still occur?
Chapter 5 Troubleshooting
Yes
Replace/reinstall the defective part(s).
Replace the CONTROLLER PWB.
Yes
Replace/reinstall the defective part(s).
Replace the CONTROLLER PWB.
Remedy
No
Go to Step 2.
Problem solved.
Remedy
No
Go to Step 2.
Problem solved.
Revision A
5-59