Fuser Exit Sensor Removal (Pl9.2.25); Upper Guide Assembly Removal (Pl9.2.32) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.12.8 FUSER EXIT SENSOR Removal (PL9.2.25)

1. Remove the EXIT TRAY ASSEMBLY. (See Section 3.2.13.1.)
2. Remove the OIL ROLL ASSEMBLY. (See Section 3.2.12.1.)
3. Remove the FUSER ASSEMBLY. (See Section 3.2.12.2.)
4. Remove the MAIN FUSER ASSEMBLY. (See Section 3.2.12.3.)
5. Remove the LOWER GUIDE ASSEMBLY. (See Section 3.2.12.7.)
6. Disconnect the connector (P/J75) for the FUSER EXIT SENSOR.
7. Release the hooks securing the FUSER EXIT SENSOR from the
FUSER BOTTOM PLATE and remove the FUSER EXIT SENSOR.
Figure 3-100. FUSER EXIT SENSOR Removal
Chapter 3 Disassembly and Assembly/Adjustment

3.2.12.9 UPPER GUIDE ASSEMBLY Removal (PL9.2.32)

1. Remove the EXIT TRAY ASSEMBLY. (See Section 3.2.13.1.)
2. Remove the OIL ROLL ASSEMBLY. (See Section 3.2.12.1.)
3. Remove the FUSER ASSEMBLY. (See Section 3.2.12.2.)
4. Remove the MAIN FUSER ASSEMBLY. (See Section 3.2.12.3.)
5. Remove the FUSER UPPER ASSEMBLY. (See Section 3.2.12.4.)
6. Open the UPPER GUIDE ASSEMBLY and align the hinges with the
cutouts in the front and rear frames, and lift up the UPPER GUIDE
ASSEMBLY to remove.
Figure 3-101. UPPER GUIDE ASSEMBLY Removal
Revision A
3-83