EPSON ColorPage EPL-C8200
3.2.16.4 DEVE. FAN Removal (PL13.1.5)
1. Remove the REAR COVER ASSEMBLY. (See Section 3.2.4.5.)
2. Disconnect the connector (P/J82) for the DEVE. FAN and release
the harness from the FAN DUCT.
3. Widen the hooks on the FAN DUCT and remove the DEVE. FAN.
When installing the DEVE. FAN, set the side with the
maker label on it facing outside.
When installing the DEVE. FAN, route the harness
properly.
Chapter 3
Disassembly and Assembly/Adjustment
Figure 3-137. DEVE. FAN Removal
Revision A
3-110