Epson ColorPage EPL-C8200 Service Manual page 375

EPSON ColorPage EPL-C8200
(Continued)
FIP-1.28 "P/H MOTOR Related Error"
Step Check point
Check: EXIT LOWER ASSY
8
Rotate the EXIT IDLER GEAR manually.

Does the EXIT LOWER ASSY rotate smoothly?
Check: MAIN P/H ASSY
9
Rotate the PRE-REGI. KNOB ASSY manually.

Does the MAIN P/H ASSY rotate smoothly?
Check: WASTE TONER BOX
1. Remove the WASTE TONER BOX.
2. Rotate the rotor in the P/H MOTOR ASSY
10
counterclockwise manually.

Does the rotor in the P/H MOTOR ASSY rotate
smoothly?
Check: FEED ROLL ASSY
1. Push down the FEED SOLENOID arm.
2. Mesh the gears.
11
3. Manually rotate the rotor in the P/H MOTOR
ASSY counterclockwise.

Dose the FEED ROLL ASSY rotate smoothly?
Check: 2ND BTR CAM ASSY
1. Remove the FUSER ASSY, BELT CLEANER
ASSY, and 2ND BTR ASSY.
12
2. Manually rotate the rotor in the P/H MOTOR
ASSY counterclockwise.

Does the BTR CAM ASSY rotate smoothly?
Check: AUGER HIGH ASSY
1. Remove the FUSER ASSY, BELT CLEANER
ASSY, and 2ND BTR ASSY.
13
2. Manually rotate the rotor in the P/H MOTOR
ASSY counterclockwise.

Does the AUGER HIGH ASSY rotate smoothly?
Chapter 5 Troubleshooting
Yes
Go to Step 9.
Go to Step 10
Go to Step 11.
Go to Step 12.
Go to Step 13.
Replace the MCU PWB.
Remedy
No
Replace the interfering part.
Replace the interfering part.
Replace the WASTE TONER BOX.
Replace the interfering part.
Replace the interfering part.
Replace the AUGER HIGH ASSY.
Revision A
5-47