Deve. Clutch Assembly Removal (Pl11.1.23) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.14.9 DEVE. CLUTCH ASSEMBLY Removal (PL11.1.23)

1. Remove the REAR COVER ASSEMBLY. (See Section 3.2.4.5.)
2. Remove the FUSER ASSEMBLY with the EXIT TRAY ASSEMBLY
and the OIL ROLL ASSEMBLY installed on it. (See Section
3.2.12.2.)
3. Remove the P/H MOTOR ASSEMBLY. (See Section 3.2.14.2.)
4. Remove the ROTARY MOTOR PWB. (See Section 3.2.14.3.)
5. Remove the LVPS. (See Section 3.2.16.1.)
6. Remove the FUSER DRIVE ASSEMBLY. (See Section 3.2.14.6.)
7. Disconnect the connector (P/J56) for the DEVE. CLUTCH
ASSEMBLY and release the harness from the clamp.
8. Remove 4 screws (silver, cup head, 8mm) securing the DEVE.
CLUTCH ASSEMBLY, and remove the DEVE. CLUTCH
ASSEMBLY.
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-132. DEVE. CLUTCH ASSEMBLY Removal
Revision A
3-106