Fip-1.2 Waste Toner Box Is Full - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

FIP-1.2 WASTE TONER BOX is Full

Check point
Perform the preliminary inspection.
Parts to inspect:
1
WASTE TONER SENSOR, WASTE TONER BOX,
TONER BOX, MCU PWB
Check: Transparency area of the WASTE TONER
BOX

Is the transparency are in the upper part of the
2
WASTE TONER BOX smeared or lodged with any
foreign matter?

Is the sensor flag part inside the box floating?
WASTE TONER SENSOR

Is the WASTE TONER SENSOR functioning
3
properly? (Check it by using the diagnostic tool.)
Diag Tool: Digital Input Test
Device Code: 21
Chapter 5 Troubleshooting
Yes
Replace/reinstall the defective part(s).
Replace or clean the WASTE TONER
BOX.
Replace the MCU PWB.
Remedy
No
Go to Step 2.
• With the diagnostic tool, go to step 3.
• Without the diagnostic tool, go to FIP-
2.17 "WASTE TONER SENSOR is
Defective".
Go to FIP-2.17 "WASTE TONER
SENSOR is Defective".
Revision A
5-19