Epson ColorPage EPL-C8200 Service Manual page 458

EPSON ColorPage EPL-C8200
Fuser
Fuser Oil Shows a consumption condition of the Fuser oil.
The indicated counter value is the same as for the
Total Page in Setup Menu. The counter is
uatomatically reset when a new Fuser Oil Roll is
installed.
Shows a consumption condition of the Fuser oil.
Fuser Oil (rate)
The counter value changes according to printer
conditions such as continuous non-printed time.
The counter is ceared when a new Fuser Oil Roll
is installed.
Shows a usage condition of the Fuser Unit. The
Fuser (Dispense)
indicated value is the total dispense time of all
toners after "Fuser Counter Clear" is executed in
the Maintenance Mode. (Unit: 100m seconds)
Fuser (Planes) Shows a usage condition of the Fuser Unit. The
indicated value is the total number of the planes
after "Fuser Counter Clear" is executed in the
Maintenance Mode.
2nd BTR Shows a usage condition of the 2nd BTR. The
indicated value is the number of sheets printed (=
Total Pages in the Setup Menu) after "2nd BTR
Clear" is executed in the Maintenance Mode.
Shows a usage condition of the IBT Cleaner. The
IBT Cleaner
indicated value is the number of sheets printed (=
Total Pages in the Setup Menu) after "IBT Cleaner
Clear" is executed in the Maintenance Mode.
(Note the IBT Cleaner life is longer than the
printer's, so the life near end warning for the IBT
Cleaner does not occur.)
Chapter 6 Maintenance
MCU Indicates the version of the P-ROM on the MCU
PWB. (Example: Version3.01.47 = 30147)
Lists the latest 20 errors indicating the
Error Log
corresponding panel messages, EJL status
codes, and Total Pages. The most recent error
appears at the top of the list, and then the rest in
order of recentness. The errors appear are

  
"
during warming-up) and "
  ". If an error
occurs when another error is already recorded for
the same Total Pages, the recent one is not
included in the list.
Revision A
(excluding ones that occur
6-7