Paper Transportation; Main P/H Assembly Removal (Pl5.1.1) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.8 Paper Transportation

3.2.8.1 MAIN P/H ASSEMBLY Removal (PL5.1.1)

1. Remove the MSI TRAY ASSEMBLY. (See Section 3.2.7.1.)
2. Remove the MSI ASSEMBLY. (See Section 3.2.7.2.)
3. Remove the MAIN P/H COVER from the MAIN P/H ASSEMBLY.
NOTE: In the following steps, be careful not to drop the MAIN P/H
ASSEMBLY.
4. Among the slide rails securing the MAIN P/H ASSEMBLY to the
printer, loosen following 2 screws well:
-1 (black, cup head, 8mm) on the P/H FRONT RAIL S
-1 (black, cup head, 8mm) on the P/H REAR RAIL S
(They are securing the P/H FRAME ASSEMBLY, P/H FRONT RAIL
S, and P/H REAR RAIL S.)
5. Leaving the P/H FRONT RAIL S, P/H FRONT RAIL L, P/H REAR
RAIL S, and P/H REAR RAIL L in the printer, take out the MAIN P/H
ASSEMBLY and remove it.
6. Using a standard driver or equivalent, push the stopper in the P/H
FRONT RAIL L inward to remove the stopper from the frame in the
printer, and remove the P/H FRONT RAIL S along with the P/H
FRONT RAIL L.
7. Using a standard driver or equivalent, push the stopper in the P/H
REAR RAIL L inward to remove the stopper from the frame in the
printer, and remove the P/H REAR RAIL S along with the P/H REAR
RAIL L.
Fasten well the screws preventing the P/H FRONT RAIL
S and P/H FRONT RAIL L from coming off the P/H
FRAME ASSEMBLY.
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-41. MAIN P/H ASSEMBLY Removal
Revision A
3-38