Operation Modes - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

2.6 Operation Modes

The printer has the following 7 operation modes:


WARM-UP: The printer is warming up to be print ready.


READY: After warm-up, the printer is waiting to print.


PRINTING: The printer is printing.


LIGHT SLEEP: Standby level 1 (Energy save mode 1)
The printer is in a mode in which, to save energy,
the Fuser control temperature is low.


DEEP SLEEP: Standby level 2 (Energy save mode 2)
The printer is in a mode in which, to save
energy, power is not supplied to the Fuser,
Fuser Fan or Developer Fan.


DIAGNOSTIC TEST: The printer can accept a diagnostic
command or is running a diagnostic.


ERROR: The printer has detected an error
(exceptions: Empty Tray error, No Paper
error, end of life errors).
The following shows the transition paths among the modes.
Chapter 2 Operating Principles
Figure 2-40. Transition Paths among the Modes
Revision A
2-44