Epson ColorPage EPL-C8200 Service Manual page 335
Color laser printer
Hide thumbs
Also See for ColorPage EPL-C8200:
- Setup manual (90 pages) ,
- Unpacking manual (24 pages) ,
- Quick reference (21 pages)
Table of Contents
Advertisement
EPSON ColorPage EPL-C8200
Replace Photocondctr
LED:
On Line = off, Continue = off
Description:
The engine has detected that the photoconductor
has expired. Printing stopped.
Remedy:
Open the front cover, replace the photoconductor
unit with a new one, and close the cover. Then turn
the printer off and back on.
Replace Waste T Box
LED:
On Line = off, Continue = off
Description:
The engine has detected that the Waste Toner Box is
full. Printing stopped.
Remedy:
Open the front cover, replace the Waste Toner Box
with a new one, and close the cover to clear the
error.
Replace Oil Roll
LED:
On Line = off, Continue = off
Description:
Engine detected that fuser oil has run out. Print
stopped.
Remedy:
Open the fuser unit, replace the Fuser Oil Roll with a
new one, and close the cover to clear the error.
Front Cover Open
LED:
On Line = off, Continue = off
Description:
The front cover is open.
Remedy:
Close the cover to clear the error.
Chapter 5
Troubleshooting
Exit Cover Open
LED:
On Line = off, Continue = off
Description:
The exit cover is open.
Remedy:
Close the cover to clear the error.
Fuser Unit Open
LED:
On Line = off, Continue = off
Description:
The fuser unit is open.
Remedy:
Close the unit to clear the error.
Paper Unit Open
LED:
On Line = off, Continue = off
Description:
The paper feed unit is open.
Remedy:
Close the unit to clear the error.
Feeder Cover Open
LED:
On Line = off, Continue = off
Description:
The feeder cover is open.
Remedy:
Close the feeder cover. The error is automatically
cleared.
Turn Paper sss
LED:
On Line = off, Continue = off
Description:
Paper is set with the short edge first.
Remedy:
Set the paper with the long edge first.
Revision A
5-7
Advertisement
Chapters
Table of Contents
Troubleshooting
