EPSON ColorPage EPL-C8200
6.2 Maintenance Menu
Maintenance Menu contains the following functions:
Shows life counter values for consumables and regularly replaced
parts and total number of printed pages and color print pages
Resets the counter values for the regularly replaced parts
Resets the counter values for total printed page number and total
color print pages.
6.2.1 Entry to the Maintenance Menu
Make sure the following conditions before entering
the Maintenance menu:
- All interface cables are disconnected.
- "Service Call Error" is not indicated.
Before exiting the menu, ensure the engine is not live.
If not, you can turn the printer off.
1. Turn the printer on while pressing the "On Line", "Form Feed", and
"Continue". All LED lamps and the LCD come on and the following
messages appears consequently in the LCD. (Keep the buttons
down until instructed to do so.)
RAM CHECK **.*
Note: **.* represents numeric which counts up.
Note: Do not release the bu ttons until the next message appears.
MAINTENANCE MODE
Ready
(The printer is in a usual ready status.)
Chapter 6
Maintenance
2. Referring to the flowchart below, activate the desirable function
through the panel operation.
NOTE:
1. Consumable and regularly replaced items for the EPL-C8200 can
be also used with the EPL-C8000.
2. BELT CLEANER ASSY of the EPL-C8200 is not a regularly
replaced part but a general after service part. Therefore,
"Maintenance Req hhhh" for the IBT Belt Cleaner near end warning
does not occur, and, accordingly, "IBT Cleaner Clear" in the
Maintenance Mode does not need to be performed .
Figure 6-2. Maintenance Menu Operation
Revision A
6-5