Error/Status Code - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

4.2.8 Error/Status Code

You can identify an error/status code of this printer from the following
statuse in the Printing/Status Control in the command/status category:
SSENG, SSCONS, SSTRAY, SSJAM, SSHW, SSLIFE, SSOPEN and
SSWARN.
A detection error is set by bit in the parameter in each status. (For
details on the parameters, see Section 4.2.7 "Command/Status List".)
Section 2 Troubleshooting lists the error/status codes that have the
same status codes.
NOTE: In Section 2 Troubleshooting, a "-" is used in place of a space
between bytes.
Chapter 4 Diagnostics
Example)
C1-04
Parameter 1 -> 04h (Bit 2: ON): No Fuser Oil
SSCON status
Example)
C5-00-20-00-00
Parameter 2 -> 20h (Bit 5: ON):
Process Motor Assembly error
Parameter 1 -> 00h
SSHW status
Transfer the previous MCU PWB Engine Status to the new MCU PWB
Revision A
4-60