EPSON ColorPage EPL-C8200
3.2.8.4 REGI. CHUTE ASSEMBLY Removal (PL5.1.6)
1. Remove the MSI TRAY ASSEMBLY. (See Section 3.2.7.1.)
2. Remove the MSI ASSEMBLY. (See Section 3.2.7.2.)
3. Remove the MAIN P/H ASSEMBLY. (See Section 3.2.8.1.)
4. Remove the screw (silver, 6mm) securing the REGI. EARTH WIRE
to the REGI. CHUTE ASSEMBLY and release the wire.
5. Remove the E-ring securing the REGI. CHUTE ASSEMBLY.
Figure 3-45. REGI. CHUTE ASSEMBLY Removal (1/2)
Chapter 3
Disassembly and Assembly/Adjustment
6. Open the REGI. CHUTE ASSEMBLY vertically and shift it to the
rear until it touches the bottom of the rear stud to release the hole in
the front from the front stud. Then lift up the front end and pull it out
to the upper front to remove the REGI. CHUTE ASSEMBLY.
Figure 3-46. REGI. CHUTE ASSEMBLY Removal (2/2)
Revision A
3-41